Mill Cleaning
Page content
The Flower Mill was designed to operate with basic cleaning (guide here), but at some point you may need to detail it.
✅ Tools
- 70% Isopropyl Alcohol
- Soft plastic bristle brush (non-abrasive)
- Microfiber cloth
- Glass or plastic dish for soaking
- PPE (gloves & goggles)
✅ Cleaning
- Remove loose plant material using a soft brush.
- Disassemble the mill entirely.
- Fully submerge in isopropyl alcohol & agitate to remove air pockets
- Soak for up to 10 minutes.
- Gently scrub deposits with a soft brush.
- Remove from alcohol.
- Wipe clean with a soft towel.
- If there are stubborn deposits, repeat steps 3-7.
- If there are stubborn deposits, repeat steps 3-7.
- Air dry for one hour or until all liquid has evaporated.
- Reassemble the mill.
✅ Apply Mill Wax after cleaning
- Keeps it turning smooth as silk
- Extends time between full cleanings
- Improves long term wear resistance

❌No harsh chemicals
- Nail polish removers
- Glass, drain, oven cleaners
- Paint thinner, methanol, gasoline
❌Don't use abrasives
- Scotch-Brite & scrubs pads can scratch the finish
❌Not dishwasher safe
- Not even the top rack!
❌No microwave or oven drying
- Towel and air dry only
❌Don't boil
- High temperatures will warp parts and damage the finish