Perfect Your Milling Ritual

So you took the plunge and got your first Flower Mill. Congratulations!

Now let’s learn how to get the most out of your mill and keep it in good working order for years to come. This guide will help you optimize your mill to suit how you’ll be using your flower once it’s prepared and your own preferences.

How to Use a Flower Mill

The milling process is much gentler than grinding, and you’ll find that the technique for using a mill requires less force from you as well. Here’s the process:

• Break flower down into smaller nugs and fill in the chamber around the center rod.
• Place the lid gently over the filled chamber, but don’t squish it down.
• Starting with very little downward force, twist the lid back and forth while keeping it level.
• Feel and listen for it to finish once there is no more material left to mill. It happens sooner than you might expect.
• Unscrew the bottom of the mill to collect your prepared flower.

Maintaining and Cleaning Your Mill

Your Flower Mill was designed to last a lifetime and operate well without needing much maintenance. A basic cleaning of the outer surfaces and applying Mill Wax is all that is needed whenever your mill starts to feel a bit sticky.

During normal operation, a thin layer of natural flower oils forms that reduces friction and wear. So you won’t need to do much to clean the inside surfaces of your mill, but wiping down the outer surfaces with a 70% isopropyl alcohol wipe helps keep it functioning well.

Once the outer surfaces are dry, you can apply Mill Wax to all outer parts and threads to keep things turning smoothly.

Never use harsh chemicals like nail polish removers to clean your mill or anything abrasive that could scratch the finish. Towel or air dry your Mill after cleaning. Never put it in the dishwasher or oven or expose it to high temperatures.

If your mill has seen a lot of use and gotten gunked up, it might be time for a deep cleaning.

To detail your Flower Mill, you’ll need:

• 70% Isopropyl Alcohol
• Soft plastic bristle brush (non-abrasive)
• Microfiber cloth
• Glass or plastic dish for soaking
• PPE (gloves & goggles)

Follow these steps to return your Mill to pristine condition:

1. Remove loose plant material using a soft brush.
2. Disassemble the mill entirely.
3. Fully submerge all parts in isopropyl alcohol & agitate to remove air pockets.
4. Soak for up to 10 minutes.
5. Gently scrub deposits with a soft brush.
6. Remove from alcohol.
7. Wipe clean with a soft towel.
8. If there are stubborn deposits, repeat steps 3-7.
9. Air dry for one hour or until all liquid has evaporated.
10. Reassemble the mill.

Once your mill has fully dried, it’s time to apply Mill Wax. Mill Wax has several benefits: it keeps your mill turning smooth as silk, extends the time between full cleanings, and improves long term wear resistance.

Customizing Your Experience

No matter how you enjoy flower, there’s a Flower Mill setup that perfectly prepares it for your chosen purpose. Both the Premium and Pro models have swappable mill plates, from #1 Extra Fine up to #5 Extra Coarse on Premium and through #6 Coarse XL on Pro, so you can choose your own adventure.

Each mill comes with the #3 Medium plate installed, but you may want your flower finer for rolling a joint, or coarser for loading a bong.

To switch out a mill plate, open your Flower Mill Premium or Pro, and then unscrew the inner ring holding the plate in place to remove it. Lift the plate by its center post to pull it out, and set the new one in its place. Then screw the ring back in and you’re ready to mill.

To improve the grip when turning your mill, add a silicone grip, available in 2”, 2.5” or 3.5” and multiple colors. On Premium, you can also swap out the housing of your mill to add some color.

With a little regular maintenance, Flower Mill is built to last. And with swappable plates and other accessories, you can make your mill your own and optimize your experience based on your preferences.